Laptop PDFs Distort Print on Documents

[Learn2010]

I have been creating programming to develop PDF files. On the desktop computer, they open to a nice clean document just as it was built. When creating these same documents on the laptop, the print is distorted in various places. Is there a setting somewhere in Nitro that can fix this, or, is it an issue with a computer setting?

Thank you.

[Allain Umailin]

Hello @Learn2010,

Thank you for reaching out to us through our Community Forums!

Are you using Nitro Pro 12? If yes, kindly run Nitro Pro with higher DPI mode by referring to these steps:
1. Right-click Nitro Pro desktop shortcut or the NitroPDF.exe (by default is installed in C:\Program Files\Nitro\Pro\12) then select Properties
2. Nitro Pro Properties window will open, click on Compatibility tab
3. Under Settings, click on Change high DPI settings.
4. Another Nitro Pro Properties window will open.
5. Enable Override high DPI scaling behavior.
6. OK > OK to save the setting and test Nitro Pro again.

Thanks for choosing Nitro Pro and I hope this helps!

[Learn2010]

Nitro Pro 11.